Set The Date; Alarm Settings; Turn On/Off The Alarm - VTech ES1310 User Manual

7.1.4

Set the Date

1. Press then
2. Press then
3. Press then
4. Press to enter the date information.
5. Press to confirm.
NOTE
If date has been set before, the current date will display.
7.2

alarm Settings

You can use this phone to set an alarm clock. When an alarm is set, the
the screen. When the alarm time is reached, the
screen ringing with the alarm melody for a duration of 45 seconds.
You can press any key to disable the alarm. If snooze function is activated, the alarm
will sound again at the end of the snooze period of seven minutes. You can also press
and hold to terminate the snooze function.
NOTES
a. The alarm will turn off when the alarm time is reached or by pressing any key while
the alarm is sounding (even if the handset keypad is locked).
b. The alarm volume level is the same as the settings of the handset ringer volume. If
the handset ringer is set to VolUME off, the alarm will sound at VOLUME 1 level.
c. During an external call or internal call, if an alarm is set and when the alarm time
is reached, the
be emitted from the earpiece to notify user the alarm time is reached. Once user
presses any key to disable the alarm, it will revert to the call duration screen.
d. During paging or ringing, the alarm will not sound when the alarm time is reached.
However if snooze function is enabled, the alarm will sound again at the end of
the snooze period provided that it's not ringing or in paging mode at the end of the
snooze period.
7.2.1

Turn on/off the alarm

1. Press then
2. Press then
3. Press then
4. Press to confirm.
NOTE
If ON is selected, you will be asked to set the alarm time in accordance with the section
below.
to select HS SETTInGS.
p q
to select DaTE & TIME.
p q
to select SET DaTE.
p q
and "ALARM ON" will still flash on screen. An alarm tone will
to select HS SETTInGS.
p q
to select alarM.
p q
to select on/off.
p q
and "ALARM ON" will flash on the
25
displays on