Table of Contents
Advertisement
4
' ' Smart-Ring
The ring function has an answer back feature. This allows you to
confirm whether or not a call has reached the member of your
group even if the operator is temporarily away from the transceiver.
D D Smart-Ring operation (see right)
q Set the same operating channel and CTCSS tone* code for all of
your group transceivers.
w Push [S-Ring/C-Ring] to send the Smart-Ring call.
• When a member of your group station answers your call, then the
transceiver emits beep tones for every 30 sec. and TX/RX indicator
blinks with an orange color.
• Push [MONI] to cancel the Ringer beep and indication.
• When no answer comes back, the transceiver emits short failure
beep tones.
e Push [PTT] to answer the call and to stop the beeps and blink-
ing.
*NOTE: This function is available only when the called station
has use the same CTCSS tone code and the same operating
channels as you.
' ' Call-Ring
Sends the pre-selected ring tone to your group members.
D D Select the Call-Ring melody
q While pushing and holding [PTT] and [S-Ring/C-Ring], rotate
[VOL] to turn the power ON.
• A sample melody is emitted.
w Rotate [CH] to select the ringer melody.
• Push [S-Ring/C-Ring] to monitor the selected melody once more.
e Turn the power OFF to determine the melody.
19
RING FUNCTION
Advertisement
Table of Contents
