Output Select; Choosing A Guitar Amplifier; Name Editing - Roland GP-16 Owner's Manual

,
•
II
c. Output Select
Choosing a guitar amplifier
For each patch, selling can be made for the channel on
which the effect sounds will be outpul. By means of the
channel that is set, you can change guitar amplifiers. The
set channel will be indicated by the Output Channel
Indicators.
The system provides for cancellation ol "Output Seled~.
stored wi1h respect to each patch. Regarding this selling,
refer to
~11.
Cancellation Output Seleel"
(r~-
P.S3).
OUT CH
/
[Step 1] From the Edit mode, using
iFLiNcTiCiN1
,call
up the parameter shown below.
CiUTF'UT SC::LECT
CHRf·~r·~EL:::: CH 1
VALUE
1/2/1&2
[Step 2] Set for the desired channel using the l£.:.9ial:
or
LVALUEJ
Output from the Balanced (XLR}connectors takes place reO.
gardles5 01 any channel senlngs.
[NOTE]
Aguilar amplifier must be connected 10 the specified
channel for sound to be produced.
d. Name Editing
Provides for attaching names to effected
sounds
You can give each patch a name using up to 16 tetters.
In Ihe Play mode (state where pafches can be selected),
the name appears on the upper line in the display.
[Step 1] From the Edit mode, using IFUNCTIONI call
upthe parameter(have it appear in thedisplay)
shown below.
22
[Step 2] Using either ,..,. (7)
i
or I'" (8)
i
move the cursor
(underline) to the letter to be changed.
[Step 3] USing the ,(t-DI~I or IVALUE ,select the
desired letters.
Pressing ICAP/SML (4)i allows you to shift between capi-
tals or small lor the lener at the cursor position.
Press
~
SPACE (3)1 to overwrite a space at the cursor
pOSl1l0n.
Repeat [Steps 2 and 3] unlil you have entered the
desired name.
The following characters are available for use on the G P-
16
,"'.
i--·; :"'."
i.'
i",
'
..
.'