Installing The Driver; Windows Xp - Roland Metaza MPX-60 User Manual

Installing the Driver

A driver must be installed in order to operate the machine.
Follow the steps below to install.

Windows XP

NOTICE
Keep the machine and the computer unconnected until you carry out this installation operation. Failure
to follow the correct procedure may make installation impossible.
See "Installing the Driver" "What to Do If Installation Is Impossible."
1 Before you start installation and setup, make sure the USB
cable is not connected.
Appear the setup menu of the CD-ROM.
2
Press the [STANDBY] key to switch on the machine.
3
Connect the machine using a USB cable.
4
The [Found New Hardware Wizard] appears.
1 What to Do Before Marking
Machine
USB cable
Computer
13