Table of Contents
Advertisement
6.
The Windows NT installation CD-ROM may be required.
Follow the remaining dialogue box prompts.
WINDOWS 2000
1.
Click the [Start] button, select [Settings] and then click
[Network and Dial-up Connections].
2.
Double-click the [Local Area Connection] icon. In the [Local
Area Connection Status] dialogue box, click [Properties].
3.
In the [Local Area Connection Properties] dialogue box, click
[Install].
4.
In the [Select Network Component Type] dialogue box, select
[Protocol] and click [Add].
5.
In the [Select Network Protocol] dialogue box, select [TCP/IP
Protocol] and click [OK].
6.
Click [Close] button in the [Local Area Connection Properties]
dialogue box.
7.
Click [Close] in the [Local Area Connection Status] dialogue
box.
WINDOWS XP AND VISTA
1.
Click the [Start] button and select [Control Panel].
2.
Select [Network and Internet Connection] and [Network
Connection].
3.
Double-click [Local Area Connection] and click [Properties] in
the [Location Area Connection Status] dialogue box.
4.
If the [Internet Protocol (TCP/IP)] is not listed, click
[Install.].
5.
In the [Select Network Component Type] dialogue box, select
[Protocol] then click [Add].
6.
In the [Select Network Protocol] dialogue box, select
[Internet Protocol (TCP/IP)] then click [OK].
7.
The Windows XP installation CD-ROM may be required.
Follow the remaining dialogue box prompts.
VarioLink 3550p Series Network Guide> 7
Advertisement
Table of Contents
