Maintenance; Maintenance Of Batteries; Battery Warnings; Charge The Battery - Mitel 5603 User Manual

Mitel 5000 communication platform (cp) and the mitel communications director (mcd)
Hide thumbs Also See for 5603:
Table of Contents

Advertisement

Mitel 5603 Wireless Handset User Guide

Maintenance

Maintenance of Batteries

Battery Warnings

The "Low battery" icon appears when the battery has 10% or less remaining capacity left.
In addition; a warning signal sounds every minute, the LED flashing orange, and the
window "Battery low. Charge now." appears.
The "Empty battery" icon is flashing when the battery has 5% or less remaining capacity
left. In addition; a warning signal sounds every second, the LED flashing red, and the
window "Battery empty. Shutting down." appears.
During a call, only the corresponding battery warning signal will notify the user. The warning
signal cannot be silenced during a call. When not in call, the warning signal can be silenced
by pressing

Charge the Battery

Place the handset in the desktop charger or in the rack charger. The battery is being charged
when the LED on the handset is steady orange. When the battery is fully charged the LED will
be green.
An animated battery icon
its current charge and ending with the full charge. A filled battery icon
charged battery.
Note: Only use the prescribed chargers for charging.

Replace the Battery

If the standby time for the handset becomes too low, the battery should be replaced by a new
one. Please contact your system administrator or your supplier, for information about new
batteries. Attach the battery as described in the illustration below. The battery is easy to replace.
It is attached inside the battery lid and is connected to the handset in such a way that no
miss-contact is possible.
52
.
is also shown in the display indicating charging by starting with
indicates a fully

Advertisement

Table of Contents
loading

Table of Contents