Advertisement
1.4 Hanging the Phone on the Wall
Your telephone is also suitable for wall mounting. Use two screws for fixing. Drill two
holes vertically, one above the other, 67mm apart, and leave the screws protruding
from the wall by 5mm. Now place the telephone without the desk support over the
screws and push it slightly downwards.
There is a small hanging device in the receiver rest to prevent the receiver from
falling when it is placed on the rest with the telephone mounted on the wall. Using a
small screwdriver, turn this hanging device until a small hook appears at the upper
end.
If you are using the telephone fitted to the wall, you can hang the receiver on the
telephone without hanging up. You will find a small hook for this purpose at the
upper end of the receiver rest.
2. PREPARATION
2.1 Ringer Volume Control
The ringer can be adjusted from a loud (HI) to a soft (LO) sound level. When you
don't want to be disturbed, slide the RINGER switch to the OFF position. You can
still make outgoing calls without being disturbed by incoming calls.
2.2 Receiver Volume Control
You can adjust the receiver volume for a more comfortable listening level. Set the
RECEIVER switch to NORM position to have a normal sound level, and set the
switch to HIGH position to have a louder sound level.
2.3 Display Contrast
With the receiver on the hook, the display contrast can be adjusted using
and
buttons.
3
Advertisement
