Setting Up; Connecting The Telephone; Ringer Settings - Geemarc PhotoPhone User Manual

Setting up

1 - CONNECTING THE TELEPHONE

- Connect the handset cord.
- Open the battery compartment.
Insert 4 alkaline batteries without mercury (Type
AAA 1.5V, not supplied) in the compartment (*). Bat-
teries are required if you wish to increase the ringer
level up to 10 dB.
Snap the battery door back in place.
- Connect the line cord plug to the line socket on
the base (*).
Connect the other end of the line cord to the
PTT socket. (*)

2 - RINGER SETTINGS

A switch located on the upper side allows the
ringer to be switched HI,LOW,OFF:
: Off,
: Low,
: Hi
6