Operating Sequence - Zanussi ZWH 520 User Manual

Operating sequence

Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
valve. Then run a cotton cycle at 60°C, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked
3. Measure out the additive
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
.
.
17
4. Switch the machine on
Turn the selector dial to the desired programme to
switch the appliance on.
To switch the appliance off turn it to O.
5. Select the desired programme
Turn the selector dial to the desired position: the
lights corresponding to the different phases making
up the selected programme light on.
The duration of the programme appears in the
display.
6. Select the spin speed or the
(no spin) option
Press the Spin speed button repeatedly, in order to
select the desired spin speed or the
relevant light will light up.
option. The