Table of Contents
Advertisement
Operating sequence
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
valve. Then run a cotton cycle at 95°C, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you have selected the prewash, pour detergent
into the appropriate compartment marked
3. Measure out the additive
If required, pour fabric softener into the
compartment marked
«MAX» mark.
P1175
4. Select the desired programme
Turn the programme selector dial to the desired
position.
.
.
, without exceeding the
P1174
The light of the START/PAUSE button starts to flash.
5. Select the spin speed or option
Turn the selector dial to the required position.
6. Select the required options
The light corresponding to the depressed button
illuminates.
Prélavage
Nuit
Demi-
Voorwas
Rinçage +
silence
charge
Court
Kort
Nacht-
Halve
Spoelen +
cyclus
belading
7. Start the programme
Depress START/PAUSE-button, the corresponding
pilot light stops flashing. The Prélavage/Lavage
(Voorwassen/Wassen) light illuminates.
Départ/
Pause
Start/
Pauze
71
Départ/
Pause
Start/
Pauze
or
Advertisement
Table of Contents
