1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Washer
  5. ZWH 5145
  6. User manual

Zanussi ZWH 5145 User Manual

Front-loading washing machine
Hide thumbs
Table of Contents

Advertisement

Quick Links

User manual
EN
Washing Machine
ZWH 5145

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZWH 5145

Summary of Contents for Zanussi ZWH 5145

  • Page 1 User manual Washing Machine ZWH 5145...

  • Page 2: Table Of Contents

    Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 16 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5...
  • Page 3 • If the machine is situated on a carpeted floor, please aged so that the inside of the washing machine is ac- adjust the feet in order to allow air to circulate freely cessible. under the appliance. Child safety • Always be sure, that there is no water leakage from ho- •...

  • Page 4: Product Description

    Product description Detergent dispenser drawer Control panel Door opening handle Rating plate Drain pump Adjustable feet Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak detergent is added at the beginning of the wash programme.

  • Page 5: Control Panel

    Control panel Below is a picture of the control panel. It shows the programme selector dial as well as the buttons and pilot lights. These are presented by relevant numbers on the following pages. Programme selector dial START/PAUSE button (Start/Pauze — Départ/ Pause) SPIN reduction button (Centrifugeren —...

  • Page 6: First Use

    Prewash Indicator pilot light (7) By selecting this option the machine performs a prewash cycle before the main wash phase. The washing time will be prolonged. This option is recommended for heavily soiled laundry. Super Quick Short cycle for lightly soiled items or for laundry which needs only freshening up.
  • Page 7 Select the Delay Start by pressing button 6 Pull out the dispenser drawer until it stops. Measure Before you start the programme, if you wish to delay the out the amount of detergent required, pour it into the start, press the button 6 repeatedly, to select the desired main wash compartment or in the appropriate com- delay.

  • Page 8: Helpful Hints And Tips

    Interrupting a programme The light 7.3 illuminates. After a few minutes the door can be opened. Press the button 5 to interrupt a programme which is run- If a programme or an option that ends with water left in the ning, the corresponding green pilot light starts blinking.

  • Page 9: Washing Programmes

    Dried grease stains: moisten with turpentine, lay the gar- • powder detergents for all types of fabric ment on a soft surface and dab the stain with the fingertips • powder detergents for delicate fabrics (60°C max) and and a cotton cloth. woollens Rust: oxalic acid dissolved in hot water or a rust removing •...

  • Page 10: Washing Programmes

    Washing Programmes Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry COTTONS (Katoen-Coton) SPIN REDUCTION 90° - 60° RINSE HOLD Main wash - Rinses PREWASH Maximum spin speed at 1400 rpm SUPER QUICK Max.
  • Page 11 Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry SYNTHETICS EASY IRON (Antikreuk-Repassage facile) SPIN REDUCTION 40° RINSE HOLD Main wash - Rinses PREWASH Maximum spin speed at 900 rpm EXTRA RINSE Max.
  • Page 12 Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry SPORT INTENSIVE (Sport intensief-Sport Intensif) SPIN REDUCTION 40° RINSE HOLD Prewash - Main wash - Rinses EXTRA RINSE Maximum spin speed at 900 rpm Max.

  • Page 13: What To Do If

    Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry O = OFF For cancelling the programme which is running or to switch the machine off . 1) If you select the Super Quick option by pressing button 3, we recommend that you reduce the maximum load as indicated. Full loading is possible however with somewhat reduced cleaning results.
  • Page 14 Problem Possible cause/Solution The water tap is closed (the button 5 red light blinks). • Open the water tap. The inlet hose is squashed or kinked (the button 5 red light blinks). • Check the inlet hose connection. The filter in the inlet hose or the inlet valve filter are blocked (the button 5 red The machine does not fill: light blinks).
  • Page 15 Problem Possible cause/Solution The programme is still running. • Wait the end of washing cycle. The door lock has not been released. The door will not open: • Wait a few minutes before opening the door. There is water in the drum. •...

  • Page 16: Technical Data

    Technical data Dimensions Width 60 cm Height 85 cm Depth 60 cm Electrical connection Information on the electrical connection is given on the rating plate, on the Voltage - Overall power - Fuse inner edge of the appliance door. Water supply pressure Minimum 0,05 MPa Maximum...
  • Page 17 Remove the drawer by To aid cleaning, the top Open the pump door. pressing the catch down- part of the additive com- Put a container below the recess of the drain pump to wards and by pulling it partment should be re- collect the water that flows out.
  • Page 18 empty. When refitting the pump cover, ensure it is securely re-tightened so as to stop leaks and young children being able to remove it. Cleaning the water inlet filters Important! If the appliance doesn't fill, takes long to fill with water, the starting button blinks yellow or the display (if available) shows the relevant alarm (see chapter "What to do if..."...

  • Page 19: Installation

    Frost precautions pull out the plug from the power socket; close the water tap; If the machine is installed in a place where the tempera- ture could drop below 0°C, remove the remaining water if necessary, wait until the water has cooled down; from the inlet hose and the drain pump.
  • Page 20 Water inlet Warning! This appliance must be connected to a cold water supply Caution! Before connecting up the appliance to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected Open the porthole and re- Fill the smaller upper hole...

  • Page 21: Electrical Connection

    Hooked over the edge of a In a sink drain pipe branch. This branch must be above sink using the plastic hose the trap so that the bend is at least 60 cm above the guide supplied with the ground. machine.
  • Page 22 Ecological hints • With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a To save water, energy and to help protect the environment, lower temperature. we recommend that you follow these tips: •...
  • Page 24 www.zanussi.com/shop...

Table of Contents