Operating Sequence - Zanussi FLS 1073 C Instructions Manual

Before executing the first wash with clothes we recommend to carry out the cleaning of
i
the drum and the barrel by a special wash, without clothes.
1. Pour a dose of detergent in the tray department corresponding to "Wash".
2. Choose a program of 40° (Cotton, delicate colours).
3. Pull till the limit, from the programmer control. The light will go on and the wash will begin.
4. After the wash is finished the light will go off. Wait, at least, three minutes, after the light goes
off, before opening the door of the washing machine.
1. Loading the washing machine
Load the laundry loosely, alternating large items
with small ones.
Do not overload the washing machine, but
always try to use its utmost capacity in
accordance with the type of fabric. Reduce the
quantity when washing very dirty or fluffy
laundry.
Once the machine is working and you wish to
add any item you must stop the program.
2. Dose the washing powder
Pull the handle to open the dispenser. Enter the
advised quantity of washing powder into
compartment.
For prewash use compartment.
3. Dose the additives
If you wish to use additives enter the softener in
the compartment with the symbol
Never exceed the MAX level.
4. Select the temperature
Tur n the dial clockwise to the desired
temperature.
5. Select the program
Turn the dial clockwise until the marker reaches
the desired program.

OPERATING SEQUENCE

.
P0004
AL025
AL023
23