Reception Functions; Transfer Station - Ricoh 3245 - Type Print Server Facsimile Reference Manual

Reception Functions

Transfer Station

Transfer Stations allow you to expand
the standard functions of your fax
machine to set up complex networks.
The diagram below may make the
concept clearer.
The following terminologies are used
in this section:
❖ ❖ ❖ ❖ Requesting Party
The machine where the message
originates.
❖ ❖ ❖ ❖ Transfer Station (this machine)
The machine that forwards the in-
coming message to another desti-
nation.
❖ ❖ ❖ ❖ Receiving Station
The facsimile or computer that re-
c e ive d t he m es sag e f rom t he
Transfer Station.
The final destination of the mes-
sage, that is the machine the Trans-
fer Station sends to. Receiving
Stations must be programmed into
a Quick Dial or Groups in the
Transfer Station.
Preparation
This machine can receive forward-
ing requests by e-mail. Before you
can use this function, you must
make the following preparations.
• Program each Transfer Station
number in this machine (Trans-
fer Station) and in the Request-
i n g P a rt y it se l f . S e e p . 19 0
"Transfer Report".
• Program the same Polling ID in
both this machine (Transfer Sta-
tion) and the Requesting Party.
See p.192 "Programming a Poll-
ing ID".
• The Requesting Party's fax
number must be programmed
GFTRRQ2E
in the destination list of this ma-
chine (Transfer Station). The
registration number must be be-
tween 00001 and 00100.
• The End Receiver's fax number,
e-mail address, or IP-Fax desti-
nation, must be programmed in
the destination list or Group
Dial of this machine (Transfer
Station).
Note
❒ You cannot receive e-mails unless
your machine has the capacity to
store two or more destinations
specified using the number keys.
❒ If the Requesting Party specifies a
Group for the Receiving Stations
and the total number of Receiving
Stations exceeds 500, the Transfer
Station cannot transfer the mes-
sage and sends a Transfer Result
Report to the Requesting Party.
Reception Functions
87
5