Inserting Logged Data Into A Spreadsheet; Example: Graphing Harmonics From The Fluke 434 - Fluke 434/PWR User Manual

Inserting Logged Data into a Spreadsheet

1.
Click on the window you want to insert.
2.
Select Edit - Copy Data to copy the reading's data to the clipboard.
3.
Switch to a spreadsheet program.
4.
Open or create a worksheet and place the cursor where you want to insert the data.
5.
Insert the data into the worksheet. The numerical readings will be arranged in
columns.
You can insert waveform and spectrum points into a spreadsheet in the
same way.
Example: Graphing Harmonics from the Fluke 43x
Proceed as follows to graph harmonics from the Fluke 43x:
1.
On the Fluke 43x select Harmonics, then select the TABLE screen (softkey F3).
2.
Start logging of readings.
3.
Select from the Logging of Readings window:
- continuous logging
- interval 0
- create new windows
- multiple readings in one window
4.
Click on Start.
FlukeView will open seven new windows to graph the harmonics readings in. The
readings of each row in the HARMONICS TABLE screen will be graphed in one
window, see the picture on the next page.
Note
2
Using FlukeView
Logging Readings
31