Logging Readings; Graphing Readings - Fluke 434/PWR User Manual

Logging Readings

Graphing Readings

You can transfer and graph readings taken by the Power Quality Analyzer over a period of
time. Up to four types of readings can be displayed in one window.
Harmonics data from the Fluke 43B are not retrieved as readings, but are
retrieved as screens. To log the 43B harmonics see page 33
To demonstrate graphing readings, V
the Power Quality Analyzer and start the
1.
Click or select Instrument - Start Logging of Readings . A dialog box
appears allowing you to select the logging parameters.
2.
Set Interval time to three seconds, and choose Continuous logging, Overwrite
existing window(s) and Multiple readings in one window.
3.
Click Start. A dialog box appears allowing you to select the type of readings you
want to log (only if you selected Instrument - Start Logging of Readings ) .
4.
Click Start to start logging. The status bar at the bottom of the screen shows the
logging progress.
5.
Click to stop logging.
Note
and A
rms
VOLTS
Countdown of the interval time
Number of readings so far
readings will be logged. Press
rms
/ / function.
AMPS HERTZ
2
Using FlukeView
Logging Readings
on
MENU
29