Limit Sets (Not For Fluke 43B); Retrieving, Saving, Sending Back A Limit Set; Viewing And Editing A Limit Set - Fluke 434/PWR User Manual

Limit Sets (not for Fluke 43B)

An instrument limit set contains all limits used for power quality monitoring.

Retrieving, Saving, Sending Back a Limit set

Proceed as follows to retrieve, save, and send back a limit set:
1.
Click to retrieve the limit set of the actual measurement
Select Instrument – Display Setup/Limits to retrieve the actual limit set or a limit
set from the Power Quality Analyzer memory.
2.
Select the required dataset and click on Start .
When ready, the limit window will be displayed:
3.
Select File – Save as to save the limit set.
Use .fvf (FlukeView format) to save the limit set window and the limit set data.
A limit set that has been saved as a .fvf file can be opened again, can be viewed using
the viewer, and can be send back the Analyzer.
4.
Click to send the active limit set to the Power Quality Analyzer.
Select Instrument – Send Setup/Limits to select the limit set to be send to the Analyzer.

Viewing and Editing a Limit set

1.
Retrieve a limit set or open a saved limit set.
2.
In the Limit window click View to open the limit viewer.
The limit viewer disconnects the instrument and connects to a virtual Power Quality
Analyzer that has been provided with the limits retrieved from the instrument. The virtual
Analyzer shows a Fluke 43x screen.
The viewer allows you:
• to view the limits as on the instrument.
• to edit the limits, save edited limit set and send it back to the analyzer.
Click on Close to close the viewer and to re-connect the instrument.
Note:
Using FlukeView
Limit Sets (not for Fluke 43B)
2
27