Selecting The Baud Rate - Fluke 434/PWR User Manual

SW43W
Users Manual
1.
2.

Selecting the Baud Rate

If you want FlukeView to communicate at another baud rate do the following:
1.
To see the Instrument Connect menu click
toolbar button (most left button):
2.
3.
4.
2
Select the Com Port that connects the instrument to the PC.
Click Connect to establish a connection with the instrument.
In the Instrument Connect menu click on Advanced. The dialog box shown
below appears .
Click Disconnect if you are connected.
Select the Baud Rate, for example 57600.
Click Connect to establish a connection with the instrument.
Note:
(connect/disconnect) in the