Océ System Configuration - Oce VarioPrint 2045 Quick Start Manual

Océ System Configuration
Océ System Configuration
Introduction
The Océ System Configuration application enables the remote System administrator
to configure and administer the DAC via a HTTPs connection.
Note: The DAC needs an operational TCP/IP network connection before Océ
System Configuration can be used. To check the configuration, use the Key Operator
System (KOS) of the machine to print a configuration report. To configure the IP
address settings of the DAC, use the Key Operator System (KOS) of the machine. To
learn how to use the Key Operator System (KOS), see the Configuration and
maintenance manual. You can download the manual at www.oce.com.
Attention: The remote System administrator must not change the security
mode. Otherwise the DAC is no longer in the certified configuration and is no
longer able to assure the security of its objects and itself. It is not possible to get
the DAC back into the certified configuration by changing the security mode
back to 'High'.
Attention: The remote System administrator must not change the 'Jobs to
overwrite' settings. If E-shredding is disabled for 'scan jobs' or 'print jobs without
security code', the DAC is no longer in the certified configuration and is no
longer able to assure the security of 'scan jobs' and 'print jobs without security
code'.
Secure connection
The network HTTPs connection to the Océ System Configuration application is
protected with SSL (Secure Socket Layer).
For the purpose of configuring the DAC prior to deployment, the DAC is delivered
with a factory-default SSL certificate. A new SSL certificate should be created
before the DAC is deployed. This must be done after the hostname of the DAC is
configured.
10 Chapter 2 DAC Configuration