Table of Contents
Advertisement
About the DAC release 8.1.10
About the DAC release 8.1.10
Introduction
The DAC (Digital Access Controller) release 8.1.10 is the controller for print and
scan jobs used with the following Océ products:
Océ VarioPrint
Océ VarioPrint
Océ 3145, 3155 and 3165.
The DAC (Digital Access Controller) release 8.1.10 will be referred to as DAC in
this manual.
This manual is intended for the System administrators that deploy and administer the
DAC in the certified configuration. When information in this (Common Criteria
certified configuration of the DAC R8.1.10) document differs from any other
documentation about administering the DAC in the certified configuration, only the
information in this document is valid.
The DAC is intended to provide scan and print functionality to users requiring a low
to moderate level of security assurance (Common Criteria Evaluation Assurance
Level 2+).
Security functions
The following security functions are evaluated to meet the Common Criteria
Evaluation Assurance Level 2+:
E-Shredding (automatic data overwriting).
Secured printing (protect print jobs with a PIN).
IP filtering (built-in firewall).
Security management functions.
Self test (integrity check with auto-repair).
Additional information
For details refer to the DAC Security Target document BSI-DSZ-CC-0325 on the
following web sites:
www.oce.com
www.commoncriteriaportal.org
www.bsi.de
6
Chapter 1 General information
®
2050, 2060 and 2070.
®
2045, 2055 and 2065.
Advertisement
Table of Contents
