Table of Contents
Advertisement
<Adjustment of WV-CF314LE>
NEAR
WIDE
Zoom knob
Loosen the zoom knob and adjust to the best view angle between TELE and WIDE.
1
Note:
• The focus may not be adjusted smoothly when the zoom adjustment ring is extremely close to
the end of W direction (T direction). At this time, slightly adjust the zoom adjustment ring
towards the T direction (W direction), and then adjust the focus.
Tighten the zoom knob.
2
Rotate the front of the lens, and make coarse adjustment of the focus between NEAR and FAR.
3
Press the [AF ] button on the side of the camera, and the ABF function will automatically
4
focus.
Note:
• The ABF function is not available over the entire focus range. Be sure to perform approximate
adjustment of the view angle before manual focusing, and then press the [AF] button to enable
the ABF function.
• For the following subjects, select ELC control method, and then manually adjust the focus.
• Fast-moving subject
• Subject with significant illuminance change
• Subject with low illuminance (such as high beam light)
• Too bright or reflective subject
• Subject behind a window
• Less contrasty subject (such as white wall)
• Subject with remarkable depth
• Subject with flicker
• Subject with parallel lines (such as a shutter)
• Blurred or dirty spherical cover
Focus knob
FAR
TELE
21
Advertisement
Table of Contents
