Table of Contents
Advertisement
Installation
Installation of camera
Turn off the power of all related devices before installation.
1 Remove the dome cover.
2 Connect all cables.
3 Install the camera (The illustration below shows installation using a gang junction box).
Mount the camera with 4 screws (M4, locally procured).
Important:
• Be sure to avoid twisting the cables when tightening the screws.
Note:
• When attached to the ceiling:
Install the camera with the "FRONT " arrow of the installation mark facing forward.
• When attached to the wall:
Install the camera with the " TOP" arrow of the installation mark facing upward.
18
Installation mark
Screws
(M4 locally procured)
Advertisement
Table of Contents
