Alternate Use Of Water Rainbow - Jacuzzi PALIO Owner's Manual

Alternate Use of Water Rainbow

You can use your Water Rainbow spout as a fill spout by permanently plumbing it to a fresh water supply if local
codes permit. Local plumbing codes may require the use of an anti-siphon valve for such a connection. Do not
interconnect water supply with recirculating system of the spa.
To make the connections necessary to use the Water Rainbow as a fill spout, follow this procedure:
• Make sure spa is unplugged and completely drained.
• Cut the 3/4" flex pipe which connects the Water Rainbow spout to the discharge system.
• Unscrew the cut pipe and fitting from the spout.
• Cap off the piping by cementing a 3/4" PVC cap where cut has been made (Cap not provided.)
• Connect permanent plumbing line to the spout.
SUGGESTED MODIFICATION
(REFER TO LOCAL CODES
FOR REQUIREMENTS)
INSTALL 3/4" PVC CAP
(NOT PROVIDED)
20
™
Spout as Fill Spout
WATER RAINBOW SPOUT
UNSCREW FITTING AND
3/4" PIPE FROM THE
SPOUT AFTER CUTTING PIPE
CUT 3/4" FLEX
PIPE HERE
TEE ON
DISCHARGE
PIPING