Abit PR5 User Manual page 74

STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PCI & ONBOARD I/O SETUP
LOAD BIOS DEFAULTS
ESC : Quit
F10 : Save & Exit Setup
Award BIOS Load BIOS Defaults
Load BIOS Defaults
To invoke this command highlight it in the main menu
and press Enter. A message will appear asking if you want
to load the BIOS defaults. Press the Y key and then the
Enter key. The BIOS default settings will load. Press the
N key if you want to cancel.
ROM PCI/ISA BIOS(XXXXXXXX)
CMOS SETUP UTILITY
AWARD SOFTWARE,INC.
Load BIOS Defaults (Y/N)? N
Load BIOS Defaults except Standard CMOS SETUP
This loads a set of troubleshooting default values perma-
nently stored in the BIOS ROM. The settings are not op-
timal and turn off all the performance features. Standard
CMOS Setup is not affected by this command.
LOAD SETUP DEFAULTS
PASSWORD SETTING
IDE HDD AUTO DETECTION
HDD LOW LEVEL FORMAT
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
: Select Item
(SHIFT)F2 : Change Color