Dimm Voltage Settings - Abit PR5 User Manual

!

DIMM Voltage Settings

Jumper JP11 sets the voltage sup-
plied to the DIMM sockets.
Default Setting : 3-Volt.
DIMM Voltage Settings
The DIMM sockets support both 5-volt and 3.3-volt un-
buffered DRAM. The voltage setting for both DIMM
sockets is controlled by jumper JP11. The socket voltage
setting must match the voltage of the DRAM on any
DIMM modules you install. The jumper settings are
shown below.
JP11: DIMM Voltage
5-Volt DIMM
3-Volt DIMM
Note:
5-Volt = FP or EDO DRAM
3-Volt = 3.3-Volt Unbuffered DRAM
Pins 1-2 Pins 2-3
Short N A
N A Short [Default]
Jumper JP11 Location
Pin 1
x
x
J P 1 1
x