Abit PR5 User Manual page 69

HDD Power Down
This shuts down IDE hard disks that support a power
saving mode after a specified time period. The settings
range from 1 to 15 minutes and can be set manually when
power management is in User Define mode. HDD Power
Down does not affect SCSI hard disks. The default set-
ting is Disabled.
The system automatically resumes from any power sav-
ing mode when there is system activity such as keyboard
activity or an IRQ wake-up event like mouse movement
or a modem ring.
Wake Up Events In Doze & Standby
The system will resume from Doze or Standby mode if
there is any activity by the parts of the system that use
the IRQs listed in this section when they are set to ON.
The system won' t wake up from such activity if an item
is set to OFF. The default settings are set so that the sys-
tem will respond to mouse or modem activity. The de-
fault settings are:
IRQ3 (Wake-Up Event)
IRQ4 (Wake-Up Event)
IRQ8 (Wake-Up Event)
IRQ12 (Wake-Up Event)
Power Down & Resume Event
This section allows setting the resume status of individual
IRQs. When set to ON, activity will wake up the system.
When set to OFF activity is ignored.
When you are finished you can press the Esc key to re-
turn to the main menu.
O N
O N
O F F
O N