Abit SE6 User Manual page 76

M-2
Go to the Windows toolbar and click the
"Start" button. Then choose the "Program" )
"HWDoctor" (See the arrow mark).
This screen will appear. You will see voltages,
fan speeds and temperature readings as well. If
any item readings are critical or over their
limitations, the reading will turn red. Also, a
pop-up window will appear to warn you the
system has a problem!
This is the warning message window:
SE6
Ignore: You can
message of the item, but it will pop
up again when an error of the same
item reoccurs.
Disable: The chosen item will be no longer
monitored thereafter, unless you
activate it in the "Configuration"
page.
Shutdown: Choosing this button will shutdown
the computer.
Help: You can read more information and
self-diagnose simple problems.
If the warning message pops up due to the
wrong warning limit, you can adjust it in the
"Configuration" option. For example, if you
set the temperature high limit to 40 C, you will
easily exceed the "proper" temperature.
Please pay attention to two things when you
want to make
"Configuration" option. Firstly, you have to
make sure your new setting is in the proper
range. Secondly, after
configuration, you have to save it. Otherwise,
the program will start with the default value the
next time.
If you encounter any problems or have any
questions about the software settings and
adjustments, please use the Winbond hardware
doctor on-line help. It should give you enough
information to answer your questions.
Appendix M
ignore the warning
any changes to
you finished
the
the