Chapter 1. Introduction Of Se6 Features; Features Of This Motherboard; Specifications - Abit SE6 User Manual

Introduction of SE6 Features

Chapter 1. Introduction of SE6 Features

1-1. Features of This Motherboard

The SE6 Motherboard is designed for use with Intel's new generation of Pentium II & III Processors,
which utilize the FC-PGA (Flip-Chip Pin Grid Array), 370-pin design. Up to 512MB of memory can be
supported.
The SE6 uses the new Intel 815E chipset. Its 133MHz capable memory interface supports the wide range
of PC 133 memory devices now on the market. Its 133MHz capable front-side bus delivers a clear
upgrade path to the future generation of 133MHz processors. The SE6 offers Ultra ATA/100. This
provides speedier HDD throughput that boosts overall system performance. Up to four IDE devices can
be supported by your system. These devices can be Ultra ATA/33, Ultra ATA/66 or Ultra ATA/100 IDE
devices.
A Digital Video Out Interface supporting digital display and TV Out are options. The SE6 also has an
integrated AC'97 2.1 CODEC onboard. This CODEC is complete with a H/W Sound Blaster Pro AC'97
digital audio controller that gives you the best sound quality and compatibility. The chipset includes
integrated 2X 3D Graphics Acceleration. For those wanting even greater graphics performance, an AGP
slot is included on the board. The AGP Slot will support a 4MB display cache AGP In-line Memory
Module (AIMM). AIMM is a lower cost alternative to a video card.
With 2 USB ports as well as capability of expanding to 4 USB slots, the SE6 meets future USB demands.
A Communication / Network Riser Slot (CNR Slot) is found on the SE6. The CNR Slot provides audio,
modem and network connectivity. The specification's main objective is to reduce the cost of audio and
modem functionality.
The SE6 has built-in hardware monitoring functions (refer to Appendix M for detailed information). This
will monitor and protect your computer, ensuring a safe computing environment.
This motherboard provides high performance for servers while also meeting the requirements for desktop
systems; both now and into the future.

1-2. Specifications

1. CPU
! Supports Intel ®
®
! Supports Intel
package)
! Supports VIA Cyrix III 500, 533 and reserves support for processors of future specification (Based
on 100MHz, 133MHz FC-PGA package)
! Supports 66, 100, and 133MHz CPU external clock speeds.
! Reserves support for future Intel Pentium
2. Chipset
! Intel 815E chipset
! Supports 66/100/133MHz (Front Side Bus)
! Supports AGP 1X/2X/4X (Sideband) 1.5V/3.3V device
! Supports Advanced Configuration and Power Management Interface (ACPI)
! Supports UDMA 33/66/100 and future specification devices
3. Graphics
! Chipset integrated 2X 3D graphics acceleration
! Support 4MB display Cache AIMM ( AGP In-line Memory Module )
®
Pentium III 500 ~ 1GHz processors (Based on FC-PGA package)
®
Celeron 300A ~ 733MHz processors (Based on 66MHz PPGA & FC-PGA
®
III processors.
1-1
User's Manual