Generator Shutdown Procedure - MULTIQUIP Power WHISPERWATT DCA-40SSI Parts And Operation Manual

ENGINE SHUTDOWN
To shutdown the generator, use the following procedure:
1. Switch both the MAIN, GFCI and LOAD circuit breakers
(Figure 52) to the "OFF" position.
Figure 52. Main, GFCI and Load
circuit breakers
2. Turn and push the engine throttle control lever (Figure
53) to the idle (low) position.
Figure 53. Engine Throttle Control Lever
3. Let the engine cool by running it for 3-5 minutes with no
load applied.
4. Turn the starter switch key to 'Stop" position (Figure
54).
Figure 54. Off/Manual Auto Switch
5. Remove the load from the UNV terminal strip.
PAGE 50 — DCA-40SSI — PARTS AND OPERATION MANUAL— FINAL COPY (07/10/01)
DCA-40SSI — GENERATOR SHUTDOWN PROCEDURE
EMERGENCY STOP
1. To stop the engine in the event of an emergency, switch
the MAIN, GFCI and LOAD circuit breakers to 'OFF'
position.
2. Turn the starter switch key to 'Stop' position.