Output Terminal Panel Connections - MULTIQUIP Power Ultra-Silent DCA-45USI Operation And Parts Manual

3Ø 480/277 Output Terminal Lug Voltages
1. Place the voltage selector switch in the 3Ø 480/277
position as shown in Figure 26.
Figure 26. Voltage Selector Switch 480/277V
Three-Phase Position
2. Connect the load wires to the Output Terminal Lugs as
shown in Figure 27.
.
Figure 27 Output Terminal Lugs
277/480V Three Phase Connections
3. Turn the voltage regulator knob (Figure 23) clockwise to
increase voltage output, turn counterclockwise to
decrease voltage output.
DCA-45USI — OPERATION AND PARTS MANUAL (STD) — REV. #2 (04/22/05) — PAGE 31
DCA-45USI — OUTPUT TERMINAL PANEL CONNECTIONS
1Ø 240V/120V Output Terminal Lug Voltages
1. Place the voltage selector switch in the 1Ø 240/120
position as shown in Figure 28.
Figure 28. Voltage Selector Switch 240/120V
2. Connect the load wires to the Output Terminal Lugs as
shown in Figure 29.
.
Figure 29 Output Terminal Lugs
1Ø-240V/120V Connections
3. Turn the voltage regulator knob (Figure 23) clockwise to
increase voltage output, turn counterclockwise to
decrease voltage output.
Single-Phase Position