How To Adjust Paper Curl; Paper Curl; Tool Mode - Xerox DocuColor 7000AP User Manual

Paper Curl

Tool Mode

Do c u Co lo r 70 0 0A P /8 0 00 A P U s er G u i de

5. How to adjust Paper Curl

When paper is exposed to heat, the paper loses
moisture and curls toward the heat source. High
coverage jobs tend to curl more due to the toner
plastification effect on the paper surface. The
system tries to reduce this by using mechanical
devices within the paper path called decurlers.
Your system has been designed with an automatic
curl control system that uses information such as:
the amount of coverage on the page, paper weight,
whether the paper is coated or uncoated, and the
current humidity and temperature to determine the
amount of pressure needed at the different
decurlers to reduce output curl.
If the curl is unacceptable, you can change the
setting.
To change the paper curl setting, you must enter
the Tools mode.
To enter Tools Mode, press the Access
1.
button on the Control Panel. The Access
Password Screen appears.
Use the keypad to enter your password.
2.
Press the Enter button.
3.
5-1