Savin 3045 Operating Instructions Manual page 24

Preparing the Machine
I
Click [Exit] in the first dialog box of the installer, and then take out the CD-
ROM.
Note
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
❒ Auto Run may not work with certain operating system settings. If this hap-
2
pens, launch "Setup.exe" on the CD-ROM root directory.
❒ Select a machine to whose IP address is displayed in [Connect To] to install
SmartDeviceMonitor for Client when using TCP/IP.
Reference
Quick Install is not available unless bidirectional communication between
the machine and computer is enabled via parallel connection. See p.56 "If
Bidirectional Communication Is Disabled" for details about bidirectional
communication between the machine and computer.
18