Appendix
Problem
No transmission
when using 1394 in-
terface connection
When connecting
the machine using
USB 2.0, the first
page of a print job
that contains a
large volume of
data is printed,
but the remaining
pages are not.
Note
❒ If the problem cannot be solved, contact your sales or service representative.
8
158
Check using the following procedure:
A
Confirm the IEEE 1394 interface cable is connected securely.
B
Restart the computer.
If the error occurs even after executing the above operation, proceed to
the following steps.
C
Unplug the IEEE 1394 interface cable connected to the computer.
D
Run the utility tool for the IEEE 1394 interface board, which is stored in
the following path on the CD-ROM "Printer Drivers and Utilities":
\UTILITY\1394\
Reference
For more information about using the utility tool for IEEE 1394, see
the README file in the same directory on the CD-ROM.
E
Restart the computer.
Check that USB Printing Support is installed on your computer.
Reference
See p.38 "Installing the Printer Driver Using USB".
Causes and Solutions