Savin 3045 Operating Instructions Manual page 159

Problem
Is the Data In indicator
blinking or lit after starting
the print job?
If not, data is not being sent to the machine.
❖ When the machine is connected to the computer using
the interface cable
Check the machine port settings are correct. For parallel port
connection, port LPT1 or LPT2 should be set.
• Windows 95 / 98 / Me
A
Click the [Start] button, point to [Settings], and then click
[Printers].
B
Click the icon of the machine. On the [File] menu, click
[Properties].
C
Click the [Details] tab.
D
In the [Print to the following port:] list, confirm the correct
port is selected.
• Windows 2000, Windows NT 4.0
A
Click the [Start] button, point to [Settings], and then click
[Printers].
B
Click the icon of the machine. On the [File] menu, click
[Properties].
C
Click the [Ports] tab.
D
In the [Print to the following port(s)] list, confirm the correct
port is selected.
• Windows XP
A
Click the [Start] button, and then click [Printers and Faxes].
B
Click the icon of the machine. On the [File] menu, click
[Properties].
C
Click the [Ports] tab.
D
In the [Print to the following port(s)] list, confirm the correct
port is selected.
• Windows Server 2003
A
Click the [Start] button, point to [Settings], and then click
[Printers and Faxes].
B
Click the icon of the machine. On the [File] menu, click
[Properties].
C
Click the [Ports] tab.
D
In the [Print to the following port(s)] list, confirm the correct
port is selected.
❖ Network connection
Contact your network administrator.
Solutions
Troubleshooting
8
153