Connecting To The Ethernet Interface - Savin 3045 Operating Instructions Manual

Getting Started
E
Turn on the computer.
Note
❒ When using Windows 95 / 98 / Me
1
/ 2000 / XP and Windows Server
2003, a printer driver installation
screen might appear when the
computer is turned on. If this hap-
pens, click [Cancel] on the screen.
For more information, see p.17
"Preparing the Machine".
The machine and computer are
now connected. The printer driver
must be installed next. For infor-
mation about how to install the
printer driver, see p.17 "Preparing
the Machine".
Connecting to the Ethernet
Interface
The network interface board supports
10 BASE-T or 100 BASE-TX connec-
tions.
Important
❒ Before making the connection,
touch the metallic part to ground
yourself.
A
Attach the supplied ferrite core to
the end of the Ethernet cable.
12
B
Turn off the main power switch.
Important
❒ Make sure the main power is off.
See "Turning On the Power",
General Settings Guide.
C
Connect the Ethernet cable to the
10 BASE-T / 100 BASE-TX port.
D
Turn on the main power switch.
1.
Indicator (green)
Remains green when the machine is
properly connected to the network.
2.
Indicator (yellow)
Turns yellow when 100 BASE-TX is
operating. Turns off when 10 BASE-T
is operating.
AJL014S
AJL019S
AJM005S