Volume Lock - One for All URC 8090 User Manual

HOW TO USE THE SLEEP KEY
The Home Producer 8 has a SLEEP key that either
operates your component's sleep timer or, if your
component does not have a sleep timer, it activates
the Home Producer 8's built-in sleep timer, after you
activate SLEEP LOCK. To use the Home Producer
8's SLEEP key, press SLEEP (SHIFT + MUTE).
If your component does not have a sleep timer, the
Home Producer 8 will access its own built-in timer.
To activate the built-in sleep timer, press SLEEP
(SHIFT + MUTE). The display will change to
[SLEEP 15]. To add time to the sleep timer, press
MENU -. Each press of MENU - will add 15 minutes
to the sleep timer, up to a total of 60 minutes. Once
the desired time is displayed on the LCD screen,
press SELECT. The display screen will change to
[SLEEP and the TIME].
Sleep Lock
If you would like the Home Producer 8 to use its
built-in sleep timer on all of your components, you
can lock the SLEEP mode. To set-up the Home
Producer 8 to use the internal sleep timer on all
components:
1 Press and hold MAGIC until the
display screen changes from
[DEVICE and the TIME] to
[TIMED SEQ].
x 2
2 Press the MENU - key twice, the
display will change to [CONFIGURE].
MENU-
Press SELECT, the display will
change to [THEATR SEL]. Press
MENU + twice, the display will read
MENU+
[SLEEP LOCK]. Press
x 2
SELECT, the display will change to
[DISABLE].
3 Press MENU - one time to change
the display to [ENABLE] then press
MENU-
SELECT. The display will return to
[DEVICE and the TIME]. Now,
whenever you press SLEEP (SHIFT
+ MUTE), the Home Producer 8 will
use its own built-in sleep timer.

VOLUME LOCK

With the Home Producer 8, you can choose which
home entertainment component controls your
volume. When you originally set up the Home
Producer 8, each individual component operates its
own volume, provided the component has volume
control. You can change this setting so that one
component controls the volume no matter which
component the Home Producer 8 is operating. For
example, to set-up the Home Producer 8 to always
control the volume through your Amplifier:
1 Press and hold MAGIC until the
display screen changes from
[DEVICE and the TIME] to
[TIMED SEQ].
2 Press the MENU - key twice, the
x 2
display will change to
MENU-
[CONFIGURE]. Press SELECT, the
display will change to [THEATR SEL].
x 2
3 Press MENU - two times, the display
will read [VOL LOCK]. Press
MENU-
SELECT, the display will change to
[UNLOCK].
4 Press MENU - one time to change
the display to [LOCK] then press
MENU-
SELECT. Now press the key for the
component that will control your
volume. In this example, to control
(Device Key)
the volume through your amplifier,
press AMP. Press SELECT. The
display will return to [DEVICE and
the TIME].
Now, when you use the volume keys on your
Home Producer 8, the volume will be controlled by
the specified component.
To return volume control to each individual
component:
1 Press and hold MAGIC until the
display screen changes from
[DEVICE and the TIME] to
[TIMED SEQ].