Changing Volume Lock; Locking Volume Control To One Mode; (Global Volume Lock); Unlocking Volume Control For A Single Device - One for All URC-4021 User Manual

CHANGING VOLUME LOCK

The One For All 4 Device Universal Remote Control is set at the factory for
independent volume control of each selected device. However, you may
change the Volume Lock setting to
ume will be locked to one mode (e.g., to control TV volume in all other
modes).After that, if desired, you can perform
selected device to set its volume control for independent operation.

Locking Volume Control To One Mode

(Global Volume Lock)

1.
2.
3.
Unlocking Volume Control For A Single Device (Individual Volume
Unlock)
1.
2.
3.
4.
5.
Unlocking All Volume Control (Restoring Default Setting)
NOTE: Performing these instructions will restore independent volume control for all pro-
grammed devices (e.g., TV volume control in TV mode, VCR volume in VCR/PVR mode,
etc.).
1.
Press and hold
then release
SET
Enter - - and then press any mode key once (e.g.,
9 9 3
The will blink twice.
LED
Now, when you press
the selected device (e.g.,
of the mode you have selected.
After performing
mode key where you want volume to be unlocked (e.g.,
) and controlled within its own mode.
DVD
Press and and hold
then release .
SET
Enter - - and then press
9 9 3
blink four times.
If desired, repeat steps 1 through 3 (of this section) for
each device that you want volume to be unlocked.
Now, after you select a device that has volume unlocked
(e.g., ), pressing
DVD
device's volume only in its own mode.
On the remote control, press and hold
light) blinks twice,then release
Global Volume Lock

Individual Volume Unlock

until the
SET LED
.
▲
,
VOL VOL
) will be controlled, regardless
TV
Global Volume Lock
until the
SET
VOL
▲ ▼
,
VOL VOL
SET
13
so that a device's vol-
(red light) blinks twice,
▼
, or , the volume of
MUTE
(above),press a desired
(red light) blinks twice,
LED
▼
once. The
LED
, or will control the
MUTE
until the
SET
.
on a
).
TV
will
(red
LED