Volume Lock - One for All Essence 4 Device Manual

Deleting a learned function
If you want to delete a learned function and return that key
to its original state, you can use the following procedure:
1.
2.
3.
4.
If you primarily use one device for controlling sound, for
example a Sound Bar or Audio Video Receiver, it's possible
to program your Essence remote to only control that device
when you use the Volume Up, Down and Mute keys. To do
this:
1.
2.
3.
4.
From now on, pressing the Volume Up, Down or Mute keys
will always control the the above programmed device, no
matter what device you are controlling.
To unlock the volume, and return the remote to controlling
each device's sound individually, the procedure is:
1.
2.
3.
713368 Essence-4 CAN_Manual URC2140 RDN1011222 incl. Codelist_75x250.indd 9 713368 Essence-4 CAN_Manual URC2140 RDN1011222 incl. Codelist_75x250.indd 9
SETUP
Press the Device key for the device your learned
function operates
Hold down the SETUP key until the LED
under the Device key blinks twice
Press 976 – the LED should blink twice
Press the key you want to reset twice – the LED
should blink twice and the learned function has been
deleted.

VOLUME LOCK

Hold down the SETUP key until the LED
under the Device key blinks twice.
Press 993 – the LED should blink twice.
Press the device key for the device to
always control volume – for example
Audio.
The LED will blink twice.
Hold down the SETUP key until the LED
under the Device key blinks twice
Press 993 – the LED should blink twice
Press VOLUME DOWN – the LED will blink
four times and Volume is now unlocked.
9
01-12-2022 16:20 01-12-2022 16:20