1. Manuals
  2. Brands
  3. One for All Manuals
  4. Remote Control
  5. URC 8090
  6. User manual

One for All URC 8090 User Manual

Home producer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
URC 8090
Home Producer

User Manual

INSTALLING THE BATTERIES
Your Home Producer 8 requires four (4) new AAA
alkaline batteries. To install the batteries:
1
On the back of the Home Producer
8 , press down on the black battery
cover near the indentation where
the black and silver sections meet
and push/slide the cover off (see
illustration).
2
Match the + and - marks on the
batteries to the + and - marks in the
battery case, then insert the
batteries.
3
Slide the battery cover back into
place.
4
Test the unit by pressing POWER.
If the batteries are inserted correctly,
the red light will blink.
NOTE: Immediately before removing the batteries, please refer to
page 8 and re-enter your TV's setup code. This will allow the Home
Producer 8 to retain its memory upon removing the batteries. If you
do not, upon entering your fresh batteries, the LCD screen may say
[MEM FAULT]. If [MEM FAULT] does appear on the LCD screen,
press and hold MAGIC until the display screen changes from [TV and
the TIME] to [TIMED SEQ]. Press the MENU - key one time. The
display screen will change to [CODE SET UP]. Press SELECT. The
display will change to [DEV SET UP]. Press SELECT and the display
screen will change to [TV]. Enter code 9-6-1. Press SELECT. Now
press and hold MAGIC until the display screen changes from [TV and
the TIME] to [TIMED SEQ]. Press the MENU + key one time. The
display screen will change to [CONFIGURE]. Press SELECT. The
display screen will change to [THEATR SEL]. Press MENU + once.
The display screen will change to [SERVICE]. Press SELECT. The
display screen will change to [MFG RESET]. Press SELECT. The
display screen will change to [SEL TO RS]. Press SELECT. The
display screen will then return to [TV and the TIME].

Advertisement

Table of Contents
loading

Related Manuals for One for All URC 8090

Summary of Contents for One for All URC 8090

  • Page 1: User Manual

    (see illustration). Match the + and - marks on the URC 8090 batteries to the + and - marks in the battery case, then insert the Home Producer batteries.
  • Page 2 Feature Function USING YOUR A/V PRODUCER The MAGIC key is used to access Features and Functions the LCD screen menu and program your Home Producer 8. The illustration below and the chart on the next two pages describe the features and the functions of the The TV, VCR, CBL, SAT, AMP, Home Producer 8’s keypad.

  • Page 3: Setting The Clock

    Feature Function SETTING THE CLOCK The CH + (Channel Up) and CH- To set up the CLOCK/TIME on the display screen: (Channel Down) keys change channels the same as the Channel Press and hold MAGIC until the Up and Down keys on your display screen changes from original remote.

  • Page 4: [Code Set Up]. Press Select

    SETTING UP YOUR HOME ENTERTAINMENT Set Up Codes for TVs (cont.) COMPONENTS Broksonic 236, 463, 180, Magnasonic 054, 156, 179, 092, 030, 093, Candle 030, 056, 186, 019, 003 To Set Up Your Television Magnavox 054, 096, 186, Carnivale 030, 187, 020, Carver 054 , 187, 170 024, 028, 036,...

  • Page 5: Setup Codes For Vcrs

    Enter the first VCR code listed for Set Up Codes for TVs (cont.) your brand in the “Set Up Codes for Sylvania 054, 096, 030, Realistic 019, 030, 032, VCRs” on pages 11-12, then press 039, 056, 154, 187, 186, 020, 165, 178, 180 SELECT.

  • Page 6: Set Up Codes For Tv/Vcr Combinations

    Set Up Codes For VCRs (Cont.) To Set Up Your Cable Box: Runco Motorola 035, 048 000, 240 Salora Turn on your Cable Box. Samsung 240, 045, 051, Multitech 000, 072 Sanky 039, 048 038, 040, 041, Press and release the CBL key. 067, 104, 008 Sansui 041, 067, 271,...
  • Page 7 Press SELECT and the display Set Up Codes For Cable Boxes screen will change to [SAT]. 003, 014, 007, Philips 025, 027, 031, 008, 011, 017, 153, 242, 290, Enter the first Satellite code listed 001, 013 Allegro 153, 000, 315, Pioneer 533, 144, 023, for your brand in the “Set Up Codes...
  • Page 8 To Set Up Your Laser Disc Player: To Set Up Your CD Player: Turn on your Laser Disc Player and Turn on your CD Player and insert a insert a disc. disc. Press and release the CD key. Press and release the AUX 1 key. AUX1 Press and hold MAGIC until the Press and hold MAGIC until the...

  • Page 9: Set Up Codes For Tuner/Receivers

    your brand in the “Set Up Codes for Set Up Codes for CD Player (Cont.) Tuner/Receivers” on page 19, then press SELECT. Point the remote Inkel Proton 152, 157 control at the Tuner/Receiver and 072, 655, 658 Kenwood 028, 037, 048, Quasar press POWER.

  • Page 10: Searching For Your Code

    SEARCHING FOR YOUR CODE To Set Up Your Amplifier Turn on your amplifier. If your components do not respond to the Home Producer 8 after trying all of the codes listed for your Press and release the AMP key. brand, or if your brand is not listed at all, try searching for your code.
  • Page 11 SETTING UP ADDITIONAL HOME Finding Out Your Code ENTERTAINMENT COMPONENTS After you have set up your components using the Besides the device keys that are already labeled search, you may need to find out which three-digit (TV, VCR, CBL, etc.), the Home Producer 8 can also code is operating your components.
  • Page 12 Press the MENU - key twice. The Sanyo LiteTouch display screen will change to Universal X10 Lutron MENU- One For All X10 [CONFIGURE]. Press SELECT. Security System The display will change to Set Up Codes for Digital Audio Tape [THEATER SEL]. Carver Marantz Press the MENU - key three times.
  • Page 13 SETTING UP THE HOME THEATER MODE KEY Set Up Codes for Video Accessories Rabbit SuperGuide The HOME THEATER mode key brings all of the TeleCaption Roctec most commonly used home theater functions into Set Up Codes for Miscellaneous Audio one mode of the remote control. Setting up the HOME THEATER mode key will allow you to Adcom Nikko...
  • Page 14 Press SELECT. This will change the Power Key Macro - Powering ON Your Home display to [TV]. Use the device keys Theater Components with One Key (TV, VCR, SAT, CBL or AUX 1) to (Device Key) choose your CHANNEL source, Press and release the HOME then press SELECT.
  • Page 15 For example, enter a sequence that SETTING UP TIMED SEQUENCES - will start your VCR recording your RECORDING WHEN YOU ARE NOT HOME DSS Satellite channel. The Home Producer 8 is equipped with a special SAT + POWER + SAT + 2 + 7 + 5 + feature that lets the user set up a sequence of key- VCR + POWER + VCR + RECORD.
  • Page 16 REPEATING A SERIES OF KEY PRESSES USING HOW TO USE THE SHIFT KEY THE AUD AND VID KEYS The Home Producer 8 has features that can be The Home Producer 8 has two Macro keys (AUD accessed by using the SHIFT key. These features and VID) that allow the user to play back a series of are listed above the key that they are mapped to.

  • Page 17: Volume Lock

    HOW TO USE THE SLEEP KEY VOLUME LOCK The Home Producer 8 has a SLEEP key that either With the Home Producer 8, you can choose which operates your component’s sleep timer or, if your home entertainment component controls your component does not have a sleep timer, it activates volume.
  • Page 18 Press the MENU - key twice, the KEYMOVER display will change to MENU- [CONFIGURE]. Press SELECT, the Keymover allows you to map features from one display will change to [THEATR SEL]. device mode to another. For example, if your VCR does not have volume control, you can map the Press MENU - two times, the display volume keys in the TV mode to the VCR mode.

  • Page 19: Clear All

    Now press the key that will control SETTING UP AND USING THE IR/RF the feature you are moving. For the COMMAND CENTER example above, press VOL +. The display will return to [DEVICE and the The Home Producer 8 comes with an IR/RF TIME].

  • Page 20: Specifications

    The Command Center also includes an additional IR COMPLIANCE WITH THE FCC RULES AND signal extension cord for use with a component that REGULATIONS is not in direct line-of-sight of the Command Center. If you have a component that is not in the line-of- This equipment has been tested and found to comply with the sight of the Command Center: limits for a class B digital device, pursuant to part 15 of the FCC...

  • Page 21: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING (cont.) Problem: Solution Problem: Solution display screen will change to LCD screen begins Replace the batteries with [SEL TO RS]. Press to fade, does not four (4) new AAA alkaline SELECT. The display appear or the red batteries. Immediately screen will then return to light blinks five times before removing the...

  • Page 22: Warranty

    As you add new components to your home Receiver you are setting up is able to be entertainment system, One For All has a remote operated with an infrared control that will fit your needs. Look for these remote control and exciting products at a retailer near you.

Table of Contents