2/15/03 9:25 AM Page 3 INTRODUCTION The One For All 6-Device PVR Universal Remote Control (URC-6131) is designed to remotely operate up to six home entertainment devices and features intuitive and easy-to use buttons to operate PVR (Personal Video Recorders) and DVD components. Its...
Page 4 FEATURES AND FUNCTIONS Use the illustration below to locate features on the One For All 6-Device PVR Universal Remote Control (URC-6131) and then study the Key Charts (on the next three pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming, see the Device Table on page 7.
OFA 6 PVR 2/15/03 9:25 AM Page 5 Key Charts When the (red light) blinks, the remote control is working and (after programming) is sending signals. Press CBL/SAT once to select a desired home entertainment device to control.Also see the Device Table on page 7.
Page 6
OFA 6 PVR 2/15/03 9:25 AM Page 6 FEATURES AND FUNCTIONS Key Charts (continued) Press once to recall the last- Prev. viewed channel and to page back one screen on the main menu. In the mode, use to select Prev. the receiver band.
NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 9 or “Programming DVD Player/ VCR Combo Control” on page 10. After programming, the One For All 6-Device PVR Universal Remote Control will be able to control the following types of devices:...
OFA 6 PVR 2/15/03 9:25 AM Page 8 INSTALLING BATTERIES ❶ ❷ ❷ ❸ On the remote control’s back, push the tab and lift off the battery cover. Obtain two (2) new AA alkaline batteries. Match the + and – marks on the batteries to the + and –...
9:25 AM Page 9 PROGRAMMING DEVICE CONTROL The One For All 6-Device PVR Universal Remote Control is preprogrammed at the factory to operate an RCA TV, VCR, and satellite receiver, a Philips Tivo PVR, a Toshiba DVD player, and a Pioneer audio receiver/amplifier. To control devices other than the default brands, perform the following steps;...
OFA 6 PVR 2/15/03 9:25 AM Page 10 PROGRAMMING DEVICE CONTROL (continued) Repeat steps 1 through 5 (on the previous page) for each device you want to control. For future reference,write down each working device code in the following boxes: Code: Code: Code:...
OFA 6 PVR 2/15/03 9:25 AM Page 11 If you’ve located a setup code that works, but it also has a separate VCR code, you’ll also need to program it into the remote control to access VCR controls as follows: a.
OFA 6 PVR 2/15/03 9:25 AM Page 12 CHECKING THE CODES If you have set up the remote control using the Searching For Your Code procedure (on the previous page), you may need to find out which four-digit code is operating your equipment. For example,to find out which code is operating your TV: On the remote control, press once.
OFA 6 PVR 2/15/03 9:25 AM Page 13 Enter . The LED will blink twice. Then press once. POWER For the first device you want in the power on sequence, press its device key (e.g., ) once. CBL/SAT Repeat step 3 up to five more times to add desired devices to the power-on sequence.
4 and 6. Upon completion of the above procedure, you can now use your One For All 6-Device PVR Universal Remote Control to control the TV’s volume and mute in the VCR mode, as well as in the TV mode.
RE-ASSIGNING DEVICE KEYS The One For All 6-Device PVR Universal Remote Control can be set to control a second TV, PVR,VCR, DVD player, or other device. For example, to control a TV, a cable box, and two VCRs, you will need to re-assign the unused...
2/15/03 9:25 AM Page 16 CHANGING VOLUME LOCK The One For All 6-Device PVR Universal Remote Control is set at the factory for independent volume control of each selected device. However, you may change the Volume Lock setting to Global Volume Lock so that a device’s volume will be locked to one mode (e.g., to control TV volume in all...
OFA 6 PVR 2/15/03 9:25 AM Page 17 Unlocking All Volume Control (Restoring Default Setting) NOTE: Performing these instructions will restore independent volume control for all programmed devices (e.g., TV volume control in TV mode, VCR volume in VCR mode, etc.). On the remote control, press and hold until the (red light) blinks twice,then...
OFA 6 PVR 2/15/03 9:25 AM Page 31 0240 Tatung 0041 Teac 0000, 0041 Technics 0035, 0162 Teknika 0035, 0037, 0000 Thomas 0000 Tivo 0618, 0636 Toshiba 0045, 0043, 0845 Totevision 0037, 0240 Unitech 0240 Vector 0045 Vector Research 0038 Video Concepts 0045 Videomagic...
Page 32
OFA 6 PVR 2/15/03 9:25 AM Page 32 TROUBLESHOOTING (continued) PROBLEM: DVD/VCR Combo does not respond properly. SOLUTION: Use the VCR codes for your brand. Some combo units may require both a DVD code and a VCR code for full operation. PROBLEM: Changing channels does not work properly.
“capture” the code for that device from its original remote control. A new code would then be created and need to be entered into your One For All 6-Device PVR Universal Remote Control. If necessary, the Customer Support representative can instruct you how to begin the capture procedure.
OFA 6 PVR 2/15/03 9:25 AM Page 34 CUSTOMER SUPPORT For assistance, please contact us in any of the following ways: • E-mail: ofasupport@ueic.com • Internet: http://www.oneforall.com • Consumer Help Line: (330) 405-8615 INSTRUCTIONS TO THE USER This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
9:25 AM Page 35 LIMITED WARRANTY One For All (“OFA”) warrants, to the original purchaser only, that this product will be free from defects in materials and workmanship, under normal use, for ninety (90) days from the date of original purchase.