Advertisement
A6>
Do not install the driver on a system equipped with these CD-
ROM drives.
the PIIX Bus Master river.
Q7>
The driver does not support
Conner CFA850A
Maxtor 71626A
Maxtor 71260AT
A7>
Do not install the driver on a system equipped with these fixed
disk drives.
There are no plans to support these drives with the PIIX
Bus aster driver.
Q8>
Windows 95 fails to report the actual size of the drive.
-OR-
Data loss or system hang has occurred after installing the
PIIX Bus Master driver.
A8>
If your disk drive is > 528MB, you should check and compare
the capacity of the drive before and after installing PIIX Bus
Master IDE driver.
If the system fails to operate reliably, de-install the driver.
It is recommended to de-install the system in Safe mode:
Press the "F8" function key when you see "Starting Windows 95";
Select "Safe mode"; and de-install the Intel driver after the
system has re-booted.
Q9>
How can I play MS-DOS based CD-ROM games?
I could not access my CD-ROM drive in MS-DOS real mode.
A9>
Your CD-ROM drive is not available in MS-DOS mode because
CD-ROM
conflict between Intel PIIX
real-mode ATAPI CD-ROM device driver.
This conflict occurs when both the real-mode driver and the
PIIX Bus
the PIIX controller.
46
There are no plans to support these drives with
real-mode driver is not loaded.
Master IDE driver attempt to access the resources of
the following fixed disk drives:
Bus Master IDE driver and a DOS
-OR-
There is a
Advertisement
