Advertisement
TX2 is for AT platform for single processors design, including Enhance
I/O chip (SMC 669 compatible) resulting in ultra IDE performance.
Another difference is that TX2 can be installed
to offer internal or external SCSI driver. It puts a RAID slot also.
course, TX2 supports Intel Pentium 75-233Mhz, MMX, AMD K5/K6-PR
233, CYRIX CX6x86 200
between 3.3v and 2.8v CPU.
You can review the content of Preface for parts of specification.
main differences between ATX586 and TX2 is as follows:
1. ATX586 is ATX factor, but TX2 is AT factor;
2. ATX586 supports dual processors, but TX2 is only for single
processor;
3. ATX586 can' t be installed SCSI on board, but TX2 does;
4. TX2 is only with 3 * 32-bit PCI, 3 * 16 bit ISA Slots, and 1 RAID for
TX2.
TX2 also has smart setting design.
change CPU and a connector module for front panel.
The package for TX2 including:
þ
TX2 mother board
þ
One set I/O cable bracket
þ
One IDE drive ribbon cable for 2 devices
þ
One Floppy ribbon cable for 2 devices
þ
One Ultra IDE device disk
þ
This user' s manual
þ
SCSI cable for TX2 only.
54
Installation For TX2
+
.
Not to mention, it has Auto Switching
In words, set a quick jumper to
Chapter
Hardware
AHA Wide SCSI chip
4
Of
The
Advertisement
