Advertisement
Q4>
One or more of the IDE/ATAPI drives on the system fail to
perform
A4>
Ensure devices on the system are connected according to the
manufacturers' documentation.
don't have any
installed on the system.
for supported devices and applications.
If the system fails to operate reliably, de-install the driver.
Q5>
The CD-ROM drive fails to perform correctly
has been installed (e.g. audio CD-ROMs or some advanced CD-
ROM applications don't operate correctly).
A5>
Please ensure that ONLY supported IDE devices or
applications are installed on the system.
release note for supported
A conflict between the PIIX Bus Master IDE driver and a
DOS real-mode ATAPI CD-ROM device driver may have
occurred. This conflict occurs when both the real-mode driver
and the PIIX Bus Master IDE driver attempt to access the
resources of the PIIX controller.
in the case that there is NO real-mode driver for the device is
installed, de-install the driver.
If the system fails to operate reliably, de-install the driver.
Q6>
The driver does not support the following CD-ROM drives.
Gallant GCD-R542B
Mitsumi FX400
Torisan S1G
Torisan C3G
Toshiba XM-5302B
Wearnes CDD-220
Wearnes CDD-620
Wearnes CDD-820
correctly and/or is not recognized by the driver.
non-supported IDE devices or applications
Please make sure that you
Please refer to the release note
Please refer to the
devices and applications.
If the drive fails to
after the driver
operate
45
Advertisement
