Advertisement
Inside the Document
This document describes setup ATX586 Dual Pentium Main Board with
Intel
430TX PCI
ATX586 is for
Enhance I/O chip (SMC 669 compatible).
installing
" 82093AA" supports two Intel Pentium (MMX)
Dual Processors.
Pentium 75-233Mhz, MMX, AMD K5/K6-PR 233, CYRIX CX6x86 200
Excepting above mentioned, ATX586 is designed with Auto
Switching between 3.3v and 2.8v CPU (when you use single CPU
only), front panel connector and Smart Jumper Setting for
different CPU.
The package for ATX586 including:
þ
ATX586 mother board
þ
Two IDE drive ribbon cable for 4 devices
þ
One Floppy ribbon cable for 2 devices
þ
One Ultra IDE device disk
þ
This user' s manual
Chapter
1
ATX586.
Due to the board supports full range of Pentium CPU MMX
75Mhz-233Mhz, AMD K5/K6-PR233, CYRIX 6x86 CX 200
Chapter 2
you can disable the I/O function in BIOS and then install a card on slot.
You also
modify the COM1 and COM2 as COM3 and COM4 in
BIOS.
Finally, the BIOS is PnP function.
IRQ, ISA IRQ and HDD mode.
installation and how to upgrade BIOS.
6
CHIPSET, resulting in Ultra IDE performance.
ATX platform
Under single processor, the
is
about positions, jumpers and connectors for
is for BIOS setup. If you want to use external I/O card,
with dual processors design, including
There is an option that
Chapter 3
Preface
CPU, said
user installs Intel
+
.
It auto detects the PCI
is for IDE DRIVER
+
.
Advertisement
