Advertisement
POST
(hex)
C0
1. Turn off OEM specific cache, shadow...
2. Initialize all the standard devices with default values
C1
Auto-detection of onboard DRAM & Cache
C3
1. Test system BIOS checksum
2. Test the first 256K DRAM
3. Expand the compressed codes into temporary DRAM area
C5
Copy the BIOS from ROM into E0000-FFFFF shadow RAM so
that POST will go faster
01-02
Reserved
03
Initialize EISA registers (EISA BIOS only)
04
Reserved
05
1. Keyboard Controller Self-Test
2. Enable Keyboard Interface
06
Reserved
07
Verifies CMOS's basic R/W functionality
BE
Program defaults values into chipset according to the
MODBINable Chipset
Default Table
09
1. Program the configuration register of Cyrix CPU according
2. OEM specific cache initialization (if needed)
0A
1. Initialize the first 32 interrupt vectors with corresponding
2. Issue CPUID instruction to identify CPU type
3. Early Power Management initialization (OEM specific)
0B
1. Verify the RTC time is valid or not
2. Detect bad battery
24
standard devices includes:
-DMA controller (8237), -Programmable Interrupt
Controller (8259), -Programmable Interval Timer
(8254), -RTC chip
including the compressed System BIOS & Option ROMs
to the MODBINable Cyrix Register Table
Interrupt handlers;Initialize INT no from 33-120 with
Dummy(Suprious); Interrupt Handler.
Description
Advertisement
