Selecting Finishing Mode; Finishing Modes And Optional Finishing Devices - Toshiba E-STUDIO555 Copying Manual

3 BASIC COPY MODES

Selecting Finishing Mode

Finishing modes and optional finishing devices

See the table below for each finishing mode.
Finishing mode
Non-sort Non-staple
Sort ( P.62)
Group ( P.62)
Rotate sort ( P.64)
Staple sort ( P.65)
Magazine sort ( P.67)
Saddle stitch ( P.67)
Magazine sort & saddle stitch
( P.67)
Hole punch ( P.69)
Inserter mode ( P.70)
The available finishing modes differ depending on the type of optional finishing devices (Finisher, Hole Punch Unit and
Inserter) installed. Finishing devices available for this equipment are as follows:
Finisher
Finisher MJ-1027
Saddle Stitch Finisher MJ-1028/MJ-1029
Hole Punch Unit
Hole Punch Unit MJ-6003
Inserter
Inserter MJ-7001
Check the finishing modes enabled with each finishing device.
Devices
Group
MJ-1027 &
MJ-6003 &
MJ-7001
MJ-1027&
MJ-6003
MJ-1027&
MJ-7001
MJ-1027
MJ-1028/1029 &
MJ-6003 &
MJ-7001
MJ-1028/1029 &
MJ-6003
MJ-1028/1029 &
MJ-7001
MJ-1028/1029
No device
60

Selecting Finishing Mode

Copies exit without being sorted or stapled.
Copies exit in the same page order as the originals one set after another.
Copies grouped by page exit.
Copies exit set by set alternately in a different direction.
Copies exit with their corner stapled.
Copies exit in a book-type page order.
Copies exit in a book-type page order with their center folded and stapled.
Magazine sort and saddle stitch are used together.
Copies exit with their side punched.
Stapling and hole punching the sheets without making copies
Sort/ Rotate Staple
sort sort
Yes — Yes
Yes — Yes
Yes — Yes
Yes — Yes
Yes — Yes
Yes — Yes
Yes — Yes
Yes — Yes
Yes Yes —
Description
Finishing mode
Magazine
Magazine sort & Saddle
sort saddle stitch
stitch
Yes —
Yes —
Yes —
Yes —
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes —
Hole Inserter
punch mode
— Yes Yes
— Yes —
— — Yes
— — —
Yes Yes
Yes —
— Yes
— —
— — —