Setting Paper Type - Toshiba E-STUDIO555 Copying Manual

1 BEFORE USING EQUIPMENT

Setting paper type

When you place any special paper other than plain paper or that not used for normal copying, you need to set the
thickness and attribute into this equipment.
The thickness and the attribute can be set together; however, one of "THICK 1" to "THICK 3" and the attribute "TAB
PAPER" cannot be set together. If one of them is set, the other setting will be cleared.
When the thickness "THICK 1, 2 or 3", or an attribute other than "NONE" is set for a drawer, the paper placed in this
drawer will not be used for the automatic paper selection mode.
When an attribute other than "NONE" is set for a drawer, the Automatic Change of Paper Source function (Feeding
the same size of paper from a different drawer even if the specified drawer from which paper is being fed is empty)
is disabled for the paper in this drawer.
For how to set Automatic Change of Paper Source, refer to the MFP Management Guide.
The set paper type appears on the equipment status indication area with an icon.
P.10 "Equipment status indication area"
Acceptable paper types are as follows:
Thickness
Button
PLAIN
Plain paper: 64 - 80 g/m
THICK 1 - 3 Thick paper
THICK 1: 81 - 105 g/m
THICK 2: 106 - 163 g/m
THICK 3: 164 - 209 g/m
Attribute
Button
NONE No attribute specified
INSERT Sheets used in the sheet insertion mode
P.107 "Sheet Insertion"
Up to 2 types of sheets (Insertion sheets 1 and 2) can be set. To set Insertion sheet 1
and 2, select the drawer for Insertion sheet 1 and press [INSERT], and then select a
drawer for Insertion sheet 2 and press [INSERT].
COVER Sheets used in the cover sheet mode
P.104 "Cover Sheet"
SPECIAL Colored paper or paper with watermarks, etc.
*1, *2 FAX paper
FAX
TAB Tab paper
*1 Fax transmission and reception is available only when the Fax Unit (optional) is installed.
*2 When lists are printed, paper set as "FAX" is used. For printing lists, refer to the MFP Management Guide.
1
Press the [USER FUNCTIONS] button on the control
panel.
18 Placing Paper
Description
2
(17 - 20 lb. Bond)
2 (21 - 28 lb. Bond)
2
(29 lb. Bond - 90 lb. Index)
2
(91 lb. Index - 110 lb. Index)
Description
Icon
—
, ,
Icon
—
,