Vax VSTDUET1600 User Manual page 5

General Safety Information
34. Be very careful when cleaning tiled walls with sockets.
35. Keep the unit on the floor.
36. Empty the water tank when the steam mop is not in use.
37. Do not overfill the tank. Do not exceed the maximum prescribed
filling level. Please use the measuring jug and funnel included.
38. Always show these instructions to a third party if you are
passing the steam mop on to them.
39. Please ensure all parts are correctly fitted before using
the product.
40. Do not attempt to remove blockages with sharp objects as they
may cause damage.
41. Do not use without the hard water filter in place.
42. Take extra care when cleaning on the stairs.
43. Keep cleaning area well lit.
44. Please refer to the manufacturers care recommendations
before use and test the steam mop on a discrete area of
flooring to begin with.
WARNING: Always switch off and unplug the steam mop
from the electrical outlet before assembling, opening or
emptying the water tank, or before connecting/disconnecting
the attachments.
IMPORTANT: The liquid or steam must not be directed
towards equipment containing electrical components, such
as the interior of ovens.
IMPORTANT: The steam mop is equipped with a thermostat
and a thermal cut-out. If for any reason the unit should
overheat, the thermostat will automatically turn the unit off.
Should this occur, unplug the steam mop from the electrical
outlet and turn off the switch. Let the unit cool, remove and
empty the water tank. To re-start the machine, plug it into an
electrical outlet and switch it back on.
IMPORTANT: We recommend the use of a Residual Current
Device with a Residual Current rating of 30mA or less.
WARNING: Never leave the steam mop in one spot on any
surface for an extended period of time as this may damage
the floor surface. Always return the mop back to the resting
tray when not in use or when not continuously moving
across the floor.
vax.com.au
IMPORTANT: This steam mop may not be suitable for all
floating floorboards or sealed floors – please check with your
floorboard manufacturer first prior to use.
This machine is intended for household use only, and NOT
for commercial or industrial use.
PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER USE.
4