Renault Scenic Driver's Handbook Manual page 69

TRIP COMPUTER AND WARNING SYSTEM
Trip mileage recorder reset
button 2 and 3
With 'trip mileage recorder' selected on
the display, press on button 2 or 3 until
the mileage recorder resets to zero.
Journey parameters reset
button 2 and 3
With one of the journey parameters se-
lected on the display, press button 2
or 3 until the display resets.
Interpreting some of the
values displayed after
2
resetting
The values showing average fuel con-
sumption, range and average speed
will become more stable and reliable
the further you travel after pressing the
reset button.
For the first few miles after pressing the
reset button you may notice:
– That the range increases as you
3
travel.
This is normal, as average fuel con-
sumption may decrease when:
– the vehicle stops accelerating;
– the engine reaches its operat-
ing temperature (if the engine
was cold when reset button was
pressed);
– driving from an urban area
onto the open road.
(continued)
– You may also notice that the average
fuel consumption increases when the
vehicle is stationary and the engine
idling.
This is normal, since the computer
takes account of fuel used during
idling.
Automatic resetting of the
journey parameters
Resetting occurs automatically when
the maximum value of any of the pa-
rameters is exceeded.
1.57