Lenovo ThinkServer RD240 Installation And User Manual page 92

78
Installation and User Guide
Table 22. Items under the PCIPnP menu (continued)
Item
Boots Graphic Adapter
Priority
LAN1
LAN1 OP-ROM
LAN2
LAN2 OP-ROM
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 23. Items under the Boot menu
Item
Boot Settings Quick Boot
Configuration
Quiet Boot
AddOn ROM
Display Mode
Bootup Num-Lock
Boot Device Priority 1st Boot Device
2nd Boot Device
Option
[Auto]
Onboard VGA
[Auto]
Enabled
Disabled
[Enabled]
Disabled
[Auto]
Enabled
Disabled
[Enabled]
Disabled
Sub-item Option
[Disabled]
Enabled
[Enabled]
Disabled
[Force BIOS]
Keep Current
[Off]
On
Boot device names
Boot device names
Description
If this option is set to Auto,
the external graphics card
will be enabled firstly. If no
external graphics card, the
integrated graphics controller
is automatically enabled. If
this option is set to Onboard
VGA, only the integrated
graphics card is enabled.
The Auto option means to
automatically enable the
integrated Ethernet controller
1. The Enabled option means
to enable the integrated
Ethernet controller 1. The
Disabled option means to
disable the integrated
Ethernet controller 1.
Enable or disable the
wake-up from LAN 1.
The Auto option means to
automatically enable the
integrated Ethernet controller
2. The Enabled option means
to enable the integrated
Ethernet controller 2. The
Disabled option means to
disable the integrated
Ethernet controller 2.
Enable or disable the
wake-up from LAN 2.
Description
Enable or disable the
quick boot feature.
Enable or disable the
feature to show OEM
Logo during the
POST.
Set the AddOn ROM
Display Mode.
Set the Num-Lock
LED state.
Set the startup device
sequence (support at
most five startup
devices).