Introduction
1.3 Function Keys
Key
Places the controller in the Configuration Set Up group select mode.
SET UP
Sequentially displays Set Up groups and allows the FUNCTION key to display
individual functions in each Set Up group.
FUNCTION
Used in conjunction with the SET UP key to select the individual functions
LOOP 1/2
of a selected Configuration Set Up group. .
LOWER
Selects an operating parameter to be shown in the lower display.
DISPLAY
Alternately selects AUTO or MAN
MANUAL
AUTO
Hold key down to cycle through configured setpoints.
SETPOINT
SELECT
RUN
Alternate action switch initiates or holds the Setpoint Ramp or Setpoint
Program.
HOLD
Acknowledges a latched alarm 1.
Increases the selected parameter value.
Decreases the selected parameter value.
2
Table 1-1 Function of Keys
Selects Display of Loop 1 or Loop 2 during operation.
UDC3300 Expanded Model: DC330E User Manual
Function
.
5/00